Product

1.0mm J-Head - MK V-BV Hotend

In stock

Go bigger with a 1.0mm hotend. These hotends are perfect for printing larger and stronger parts in a fraction of the time. In some tests, print time has been reduced down to 20% making this a great hotend for draft prototypes or prints where surface finish isn't important. With a 1.0mm hotend you can now print from 300 micron up to 750 micron layer heights and with less walls for some impressive results. Remember to use high cooling when printing.

Learn more here:
http://www.gcreate.com/hotends

Genuine J-Head MK V-BV Hotends come fully assembled with thermistor, wires, and heater cartridge all pre-installed with kapton tape. These are the original J-Head hotends designed by Brian Reifsnyder which are top quality. The hotends are made out of PEEK plastic and have a max temperature of 243C degrees. Overriding the firmware to anything beyond this temperature can result in damage and is highly discouraged.

Please refer to the Reprap Wikipedia page for more information:
http://reprap.org/wiki/J_Head_Nozzle

Made for 1.75mm diameter filament and compatible with gMax 1.5 and gMax 1.5+ Printers.

If you are upgrading from a gMax 1.5 to a gMax 1.5+ you will need to add the J-Head mounting plate made of laser cut aluminum.

All gMax 1.5+ printers already have this plate included.

 

Product Contains:

  • Genuine 1.0mm J-Head MK V-BV Hotend fully assembled
  • Contains 40 watt 12V heater cartridge
  • Thermister and heater wires are cut and stripped to insert in screw terminal

Made in the USA

Hotends - Hotends

Go bigger with a 1.0mm hotend. These hotends are perfect for printing larger and stronger parts in a fraction of the time. In some tests, print time has been reduced down to 20% making this a great hotend for draft prototypes or prints where surface finish isn't important. With a 1.0mm hotend you can now print from 300 micron up to 750 micron layer heights and with less walls for some impressive results. Remember to use high cooling when printing.

Learn more here:
http://www.gcreate.com/hotends

Genuine J-Head MK V-BV Hotends come fully assembled with thermistor, wires, and heater cartridge all pre-installed with kapton tape. These are the original J-Head hotends designed by Brian Reifsnyder which are top quality. The hotends are made out of PEEK plastic and have a max temperature of 243C degrees. Overriding the firmware to anything beyond this temperature can result in damage and is highly discouraged.

Please refer to the Reprap Wikipedia page for more information:
http://reprap.org/wiki/J_Head_Nozzle

Made for 1.75mm diameter filament and compatible with gMax 1.5 and gMax 1.5+ Printers.

If you are upgrading from a gMax 1.5 to a gMax 1.5+ you will need to add the J-Head mounting plate made of laser cut aluminum.

All gMax 1.5+ printers already have this plate included.

 

Product Contains:

  • Genuine 1.0mm J-Head MK V-BV Hotend fully assembled
  • Contains 40 watt 12V heater cartridge
  • Thermister and heater wires are cut and stripped to insert in screw terminal

Made in the USA

For more information, please review our terms and conditions: https://shop.gcreate.com/pages/terms-and-conditions