Product

E3D V6 All-Metal Hotend - 0.5mm Nozzle

In stock

Enhance your gMax Printer even further with a Genuine E3D v6 all-metal hotend. This all-metal hotend will allow you to expand your filament ranges, including hi-temp filaments up to 300C, while simultaneously improving print quality.

The stock nozzle size is 0.5mm which allows you to use the same slicing settings as the popular 0.5mm J-Head nozzle and use exotic materials such as wood fills and ninjaflex.

Note: The E3D hotend is currently only available for single extruders. A dual extruder option is being tested but is not available.

Learn More here:
http://www.gcreate.com/hotends

Thanks to the E3D's innovative design you can easily swap the brass nozzle tips with different nozzle sizes, other hardened nozzles for abrasive material printing, or even add a 1.2 mm volcano nozzle for massive filament flow.

Each hotend comes fully assembled and uses the upgraded 12V 40watt heater cartridge for ultra fast heating. We are also including a new 3D printed fan shroud and BLTouch sensor bracket since the E3D is longer than the standard J-Head hotend.

You can also download the files here:
http://forum.gcreate.com/downloads.php?cat=23

** Important, the E3D hotend requires a new firmware installation to raise the base maximum temperature from 243C to 300C. When installing the new firmware you simply have to change one variable, under configuration.h, as seen in the last image.  Get the firmware here:
http://forum.gcreate.com/downloads.php?cat=6 
**

 

Product Contains:

  • Genuine E3D v6 All-Metal Hotend (0.5mm nozzle)
  • 3D Printed Fan Shroud w/ 4-40 Nuts (CF PLA)
  • 3D Printed BLTouch Bracket (CF PLA)
  • PTFE Tube for E3D

Note: Product comes FULLY ASSEMBLED

Made in the USA

Frontpage Hotends - e3d Hotends

Enhance your gMax Printer even further with a Genuine E3D v6 all-metal hotend. This all-metal hotend will allow you to expand your filament ranges, including hi-temp filaments up to 300C, while simultaneously improving print quality.

The stock nozzle size is 0.5mm which allows you to use the same slicing settings as the popular 0.5mm J-Head nozzle and use exotic materials such as wood fills and ninjaflex.

Note: The E3D hotend is currently only available for single extruders. A dual extruder option is being tested but is not available.

Learn More here:
http://www.gcreate.com/hotends

Thanks to the E3D's innovative design you can easily swap the brass nozzle tips with different nozzle sizes, other hardened nozzles for abrasive material printing, or even add a 1.2 mm volcano nozzle for massive filament flow.

Each hotend comes fully assembled and uses the upgraded 12V 40watt heater cartridge for ultra fast heating. We are also including a new 3D printed fan shroud and BLTouch sensor bracket since the E3D is longer than the standard J-Head hotend.

You can also download the files here:
http://forum.gcreate.com/downloads.php?cat=23

** Important, the E3D hotend requires a new firmware installation to raise the base maximum temperature from 243C to 300C. When installing the new firmware you simply have to change one variable, under configuration.h, as seen in the last image.  Get the firmware here:
http://forum.gcreate.com/downloads.php?cat=6 
**

 

Product Contains:

  • Genuine E3D v6 All-Metal Hotend (0.5mm nozzle)
  • 3D Printed Fan Shroud w/ 4-40 Nuts (CF PLA)
  • 3D Printed BLTouch Bracket (CF PLA)
  • PTFE Tube for E3D

Note: Product comes FULLY ASSEMBLED

Made in the USA

For more information, please review our terms and conditions: https://shop.gcreate.com/pages/terms-and-conditions

Popular Items